All Collections
MAINTENANCE AND TECHNICAL QUESTIONS
HOW DO I CHANGE MY START CODE?
HOW DO I CHANGE MY START CODE?

You might want to personlize the start code for you Goldfish. This is how you do it.

Jørgen Løwe avatar
Written by Jørgen Løwe
Updated over a week ago

All recently built boats from Goldfish is delivered with a Start Panel as standard. Either you want to change to code to lock the boat from you kids, wife or simply just want a new code this is how you should do it. 

All new builds delivered from Goldfish has a factory set Pin code. We highly recommend you to change this into your personal code. Here is how you do it: 

  1. Make sure the main power is turned on. 

  2. Key in PIN code (4 digits). When the code is accepted the red dot will light constantly, and the start button will light up. The panel shuts down after 2 minutes without activity if neither ignition or start is activated.

  3. Push: #4#XXXX#YYYY#YYYY#  Where XXXX= old code and YYYY= new code. 

  4. Hold down START to start the engine. 

We recommend you to stop the engine, turn off the main power and perform a regular Engine Start Procedure before leaving the port.  

Did this answer your question?