All new builds delivered from Goldfish has (0000) as factory set Pin code. We highly recommend you to change this into your personal code. Here is how you do it: 

  1. Make sure the main power is turned on. 
  2. Key in PIN code (4 digits, factory setting is 0000). When the code is accepted the red dot will light constantly, and the start button will light up. The panel shuts down after 2 minutes without activity if neither ignition or start is activated.
  3. Push: #4#XXXX#YYYY#YYYY#  Where XXXX= old code and YYYY= new code. 
  4. Hold down START to start the engine. 

We recommend you to stop the engine, turn off the main power and perform a regular Engine Start Procedure

Did this answer your question?